Description
SKYRC LiPoPal Voltage Checker and Equalizer – SK-500007
SKYRC LiPoPal is a simple to use battery checker and self voltage balancer. When flying or driving outside, it is difficult to know the remaining capacity of the battery. This tiny LiPoPal checks the voltage of each cell and the remaining capacity in percentage so you know how long you have left to play. If the battery pack is properly balanced, the battery performance will be much better and the cycle life will be longer. LipoPal will balance your batteries in the field, moving charge from the high cells to the low.
Functions:
LipoPal will do two things:
1. Battery Checker
The LiPoPal can check the voltage of each cell of a lithium battery pack and remaining capacity in percentage %.
2. Self Voltage Balancer
This program can equalise the individual voltages to their lowest one. Balance operation automatically starts about 5 seconds after the battery pack is connected. When the voltage difference between cells over 0.02V, the balancer will start to work. The corresponding “V” will be blinking when it is balancing. When the voltage difference between cells reaches 0.01V or less, balance operation ends and the device enters the sleep mode and “SLP” will be displayed on the LCD.
How to use?
Simply connect the battery pack to 7-pins internal XH connector (or adapter lead if required). Please note the negative lead or pin of the LiPo battery connector should match the “Negative” marked on the shell of LiPoPal. After the LiPo is connected, the LCD display the voltage of each cell and the built in balance will check the voltage. If the pack is not balanced, the balancer will start working.
- Applicable Battery Pack: 2-6S LiPo
- Voltage Display Tolerance: +/-1.5%
- Voltage Display Resolution: 0.01v
- Voltage Display Range: 0-5v
- Balancing Current: 50mA
- Operating Temperature: 10~+45°C
- Storage Temperature: -20~+60°C
- Case Size: 70x38x11mm
- Weight: 23g
Explore more from our collection.
Reviews
There are no reviews yet.